Deming - Vertical Process Pumps
Deming Vertical Process Pumps
Deming Vertical Process pumps are space-saving, always primed, with a cantilever shaft, no submerged bearings, and a broad capacity range.
Features:
- Casing– Vertically split, end suction design. Double volute type on pumps with 3” and larger discharge.
- Impeller– Series 5560 pumps have semi-open type impeller with heavy vanes for outstanding performance. Back pump-out vanes on a semi-open impeller reduce pressure behind the impeller and limit axial thrust.
- Power Frame– Heavy duty, one-piece cast iron, precision bored, and machined to assure alignment of the rotating assembly. Series 4310-11 pumps are short set designs. Series 5560 are available in 9”, 12”, and 15” extension lengths below the support plate.
- Shaft– High strength shaft is extra heavy for maximum loads with minimum deflection. The impeller is keyed to the shaft and locked with an impeller nut or large-cap screw.
Applications:
- Coolants
- Metal and Parts Washing
- Filtering
- Air Conditioning
- Pickling
- Circulation
- Paint Systems Plating
- Air Washers
- Pollution Control
