Gusher 7550 Vortex Series: The Vortex Non-Clog Impeller is designed to handle large-diameter solids and fibrous material without clogging. The Vortex Non-Clog Pumps will handle solids up to the same diameter as the discharge. There is reduced radial loading for trouble free operation. Even with low flows, the Vortex Non-Clog design allows throttling to a low performance range unacceptable to many centrifugal pumps. The complete Vortex Non-Clog line has been designed to pump various liquids and oils containing up to 30% entrained air. They will operate 23% below its first critical speed at any point of operation. The Vortex Non-Clog Pump shaft is designed to have a maximum total indicated run-out not to exceed .008 inches.

Features:

• Capacities up to 800 GPM
• Capacities to 2600 GPM
• Heads to 440 TDH (190 PSI)
• Temperatures to 500o F
• Pressures to 285 PSIG

Applications:

• Filter slurries
• Latex
• Polystyrene beads
• Crystal suspensions
• Screen rejects
• Hydropulper pump
• Sodium chlorate slurry
• Fruit and vegetable suspensions
• Dye liquor
• Fibrous wastewater
• Long fiber white water
• Primary cleaner pump