MP Pumps - CHEMFLO® 4 HYDRAULIC
MP Pumps – CHEMFLO 4 Hydraulic
With .22 or .37 cubic inch displacement SAE port fitting gerotor type motors, this end suction centrifugal pump boasts hydraulic flows up to 10 GPM and a maximum pressure of 2500 PSI. This chemical pump is available with either a semi-open impeller or a fully enclosed impeller design to fit your application-specific needs.
The ChemFlo® 4 hydraulic pumps utilize a semi-open impeller design to allow for the passage of larger solid sizes than similar-sized enclosed impellers. Enclosed impeller options are available for higher efficiency performance. Several seal options are available in addition to the standard type 2100 carbon/ceramic / Viton mechanical seal.
ChemFlo®4 hydraulic pumps are offered with .22 or .37 cubic inch displacement SAE port fitting gerotor type motors for hydraulic flows up to 10 GPM and a maximum pressure of 2,500 PSI. An optional case drain allows the motor to be used in series with other hydraulic devices. Some hydraulic motors are bi-rotational.
Further expanding the versatility of the ChemFlo® series is the CFB 4 pump, a ChemFlo® 4 in NiBrAl material. All wetted parts are produced in CA 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications.
Specifications
SUCTION AND DISCHARGE – 2″ x 1-1/2″ NPT
APPLICATION – Agricultural, Commercial, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION – 316 stainless steel, CFB (nickel aluminum bronze)
FLOW – Up to 220 GPM
HEAD FEET – Up to 205′
IMPELLER – 4.5″ semi-open, cast 316 SS
DRIVE OPTIONS – Hydraulic motor .22 cu. in, Hydraulic motor .37 cu. in.
SEAL – Standard carbon / ceramic / Viton
OPTIONS – Hydraulic motors with flow control, case drain
HYDRAULIC SYSTEM PRESSURE – Up to 2500 PSI
HYDRAULIC MOTOR – Gerotor
HYDRAULIC FLUID FLOW – Up to 10 GPM
PSI – Up to 100
