The CHEMFLO® 5 Hydraulic end suction centrifugal pump is made with high-quality investment cast 316 stainless steel parts to guarantee no corrosion runs its course on the pump. This model of chemical pump is offered with a 1.16 or 1.59 cubic inch displacement SAE port. This fits gerotor-type motors reaching hydraulic flows up to 28 GPM and a max pressure of 1500 PSI.

The ChemFlo® 5 hydraulic pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple hydraulic flows allow the ChemFlo® 5 to meet most duty points up to 300 GPM and total head up to 200 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon/ceramic / Viton mechanical seal.

ChemFlo® 5 hydraulic pumps are offered with 1.16 or 1.59 cubic inch displacement SAE port fitting gerotor type motors for hydraulic flows up to 28 GPM and a maximum pressure of 1500 PSI. Some hydraulic motors are bi-rotational.

Specifications

SUCTION AND DISCHARGE – 2″ x 1-1/2″ ANSI 125# flange

APPLICATION – Agricultural, Commercial, Industrial, Marine, OEM

MATERIALS OF CONSTRUCTION – 316 stainless steel

FLOW – Up to 300 GPM

HEAD FEET – Up to 200′

IMPELLER – 6.18″ enclosed, cast 316 SS

DRIVE OPTIONS – Hydraulic motor 1.16 cu. in., Hydraulic motor 1.59 cu. in.

SEAL – Special seal material combinations available (consult factory)

HYDRAULIC FLUID FLOW – Up to 28 GPM

HYDRAULIC SYSTEM PRESSURE – Up to 1500 PSI

HYDRAULIC MOTOR – Gerotor

PSI – Up to 85