MP Pumps CHEMFLO® 8 HYDRAULIC

MP Pumps CHEMFLO® 8 HYDRAULIC

MP Pumps – CHEMFLO 8 Hydraulic

A closed impeller design achieves higher efficiencies and heads for this chemical pump. The CHEMFLO® 8 hydraulic end suction pump comes standard with a 2100 carbon/ceramic / Viton mechanical seal. This chemical pump model is available in a 1.59 cubic inch displacement SAE port.

The ChemFlo® 8 hydraulic pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple hydraulic flows allow the ChemFlo® 8 to meet most duty points up to 395 GPM and total head up to 305 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon/ceramic / Viton mechanical seal.

ChemFlo® 8 hydraulic pumps are offered with a 1.59 cubic inch displacement SAE port fitting gerotor-type motor for hydraulic flows up to 26 GPM and a maximum pressure of 2400 PSI. Some hydraulic motors are bi-rotational.

Specifications
 
SUCTION AND DISCHARGE    3″ x 1-1/2″ 125# ANSI flange
APPLICATION    Agricultural, Commercial, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION    316 stainless steel, Stainless steel
FLOW    Up to 395 GPM
HEAD FEET    Up to 305′
IMPELLER    8.0″ enclosed, cast 316 stainless steel
DRIVE OPTIONS    Hydraulic motor 1.59 cu. in.
SEAL    Special seal material combinations available (consult factory), Standard carbon / ceramic / Viton
PSI    Up to 134
HYDRAULIC MOTOR    Gerotor
HYDRAULIC SYSTEM PRESSURE    Up to 2400 PSI
HYDRAULIC FLUID FLOW    Up to 26 GPM