MP Pumps - Flomax® 5 Hydraulic

MP Pumps - Flomax® 5 Hydraulic

MP Pumps – Flomax® 5 Hydraulic

FLOMAX® 5 Hydraulic self-priming centrifugal pumps are capable of creating a vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the self-priming pump’s built-in flapper valve will maintain a full column of liquid in the suction line. This centrifugal pump is available in a .22, .37, and .45 cubic inch displacement motor.

A FLOMAX® 5 hydraulic pump is available in .22, .37, or .45 cubic inch displacement gerotor motors. They are capable of hydraulic flows ranging from 4 GPM to 11 GPM and hydraulic pressures ranging from 700 PSI to 1950 PSI.

Standard features include a stainless steel drive sleeve, stainless steel fasteners, a renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease lubricated seals, stainless steel impellers, and seals for all types of abrasive and/or corrosive services.

The FLOMAX® series of pumps are commonly used in Industrial, Agricultural, and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.

Specifications

 

SUCTION AND DISCHARGE – 1.5″ x 1.5″ NPT ports

APPLICATION – Agricultural, Industrial, Marine

MATERIALS OF CONSTRUCTION – Aluminum, Bronze, Cast iron

FLOW – Up to 175 GPM

HEAD FEET – Up to 230′

IMPELLER – 5.0″ semi-open

DRIVE OPTIONS – Hydraulic motor .22 cu. in, Hydraulic motor .37 cu. in., Hydraulic motor .45 cu. in.

SEAL – Special seal material combinations available (consult factory), Standard carbon/ceramic / Viton

HYDRAULIC MOTOR – Gerotor

PSI – Up to 100

HYDRAULIC SYSTEM PRESSURE – Up to 2550 psi

HYDRAULIC FLUID FLOW – Up to 11 GPM

MAX SOLID SIZE – .56″ diameter

FEATURES – Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25′ suction lift