Yamada® NDP-20 Series

Yamada NDP-15 Series

Yamada® NDP-20 Series

3/4″ FLUID PORT

Yamada® NDP-20 series AODD pumps provide a maximum flow rate of 31.7 gallons per minute. Pumps are available in aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.

Unified Air Valve Concept – 2 common size air valve assemblies used for 6 sizes of pumps                            
Reducing reassembly confusion and parts inventory

Truly No-Lubricated Air Valve – patented air valve on all NDP series pumps
Never requires lubrication or pre-packing

Non-Stalling – patented non-centering, 304SS spring-assisted shifter, ensuring a positive shift every time

Tested to last over 300 million cycles

Aides in the long-dead head application for reliable startup

Our air valve technology separates Yamada from the rest of the pack. Yamada uses a non-lubricated main air valve and independent pilot mechanisms to control the air logic.

As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool.  As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side pulls the diaphragm inward.

When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.

The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.

 

31.7 Gallons/Minute
3/4″ NPT Fluid Port

 

INTAKE & DISCHARGE CONNECTIONS
Polypropylene (PPG)3/4″ Female NPT or 3/4″ ANSI Flange B16.5 #150
Aluminum (ADC-12)3/4″ Female NPT
Stainless Steel (316)3/4″ Female NPT
Air Inlet1/4″ Female NPT (includes ball valve)
Air Exhaust3/4″ Female NPT (includes silencer)

 

MAXIMUM LIQUID TEMPERATURE1
Buna N 180°F (82°C)
Neoprene 180°F (82°C)
Santoprene®(TPO) 180°F (82°C)
EPDM 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
Ultimate 212°F (100°C)
1Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.

 

Air Supply Pressure (All Models)20 to 100 PSI (1.4 to 7 kgf/cm²)
Discharge Volume Per Cycle

Rubber diaphragm: 0.163 gallons (615 cc)
PTFE diaphragm: 0.143 gallons (539 cc)

Maximum Cycles Per Minute

Rubber diaphragm: 195
PTFE diaphragm: 195

Maximum Size Solid1/16″ (2.0 mm)
Maximum Dry Suction LiftRubber-fitted pump capability: 18-feet
Air MotorAluminum – Metal Pumps
Plastic – Plastic Pumps
Optional CoatingPTFE-coated
Other OptionsSplit manifold pumps